The X1 B is Pro-Ject's first turntable with a fully balanced mini XLR output, which offers you a symmetrical connection to the Phono Box S3 B or Phono Box DS3 B.
High End Tonearm & Cartridge
The X1 B uses a 8,6“ carbon/aluminium tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. The ultra-low friction 4 pin point tonearm bearing guarantees a precise, stable and accurate tracking. The one-piece design avoids vibrations caused by detachable headshells. The higher mass makes the tonearm an excellent fit for low and moderate compliance MC cartridges. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50%.
The X1 B comes with a high quality Pick it S2 MM cartridge. The full aluminium tonearm base offers you real audiophile features. It allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes, allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.
Mini XLR & RCA Output
The X1 B comes with a high-quality Connect it E cable. It is a semi-balanced, low-capacitance cable, with superior shielding. In order to be able to use the advantages of the balanced signal transmission, you need one of Pro-Ject's balanced phono cables. If you want to use your X1 B with a Phono Box S3 B you need a "Connect it Phono Mini XLR / Mini XLR“.
Quiet and Stable Speed
The motor of the X1 B by itself, is already very quiet. To get the best performance out of it, Pro-Ject designed a motor suspension which goes hand in hand. It allows the motor to run stable and free from outside influences. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge.
The motor is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels.
The playback speeds are electronically controlled with a sophisticated DC/AC generator, which guarantees the most accurate and stable music reproduction. Change between speeds easily with just a press of a button. Using the flat belt, you can switch between 33 and 45 RPM. If you mount the supplied round belt, you are able to switch between 45 and 78 RPM.
Perfect Stand & Beautiful Finish
The X1 has all the high-end features of modern turntable designs to maximize the music and listening experience. Due to the high mass, the X1 B allows the vinyl reproduction to become more detailed. The X1 B stands on height adjustable damped aluminium feet to guarantee the perfect stand. The MDF plinth is covered with 8 layers of paint and polished by hand to receive this beautiful finish. It is available in four different finishes; a premium walnut wood veneer, a luxurious black 8-layer high gloss paint, and black or white eight-layer hand-polished satin paint.
The X1 B is handmade in Europe with only premium materials to fulfill Pro-Ject's high quality standards.
Key Features:
Audiophile equipment manufacturer founded in 1991 by Heinz Lichtenegger and based in Mistelbach, Austria. Pro-Ject Audio Systems develops products in Austria and manufactures them in Europe. It manufactures a wide range of audio equipment, including a family of turntables that are often cited as entry-level reference models. Pro-Ject Audio Systems also manufactures a range of micro hi-fi components such as Amplifiers, CD Cassettes, Phono Studios, Streaming Devices, Loudspeakers and more. Today, Pro-Ject audio systems are shipped to more than 80 countries around the world.
Find out more about Pro-Ject